Welcome to the P C Industries blog. We strive
to be the best there is in the diesel engine and parts industry. We specialize in Detroit
Diesel 2 cycle engines and parts. We go beyond industry standards to ensure
customer satisfaction and to produce quality products that last. We understand
that it’s the little things that matter and we have the experience and
commitment to be attentive to the details to get the job done
right.
In this post we are listing
some of the engines that we have in stock, ready to be shipped. All engines
listed have either been completely remanufactured, rebuilt or thoroughly
inspected depending on its condition. All engines are dynamometer tested to
manufacturer’s specifications to ensure reliability. To learn more about our
engines please visit our website at www.powerlinecomponents.com or
call us at 877-885-4724 and speak with one of our experienced sales personnel.
Engine
Condition
You
will see that there are different conditions that these engines are available in
and feel that the different types need to be explained.
- New engines carry a one year parts and six month labor warranty.
- Rebuilt engines carry a six month parts and labor warranty.
- Remanufactured engines carry a one year parts and six month labor warranty.
- Excellent Running Take Outs (RTO) are estimated to have less than 650 hours since overhaul. They carry a six month parts and labor warranty.
- Good Running Take Outs (GRTO) are estimated to have less than 750 hours since the overhaul. They carry a 90 day major failure parts only warranty.
- Running Take Outs (RTO) are estimated to have less than 1500 hours since overhaul. They carry a 90 day major failure parts only warranty
Core
Charges
You will notice that some
PCI
Prices will have the core charges included in the price. A
core charge is a fee/deposit that you must pay when purchasing a remanufactured
engine, but will be refunded to you if you return your old rebuildable engine
within 60 days.
You have the option to send
the engine core in before or after the purchase. If the engine core is sent in
before, you will be notified of the condition of the engine core and if there
are any additional charges due to components not being rebuildable. If sent in
after, then both the engine price and core charge must be paid up front.
When we receive your core,
our technicians will disassemble it and inspect all of the parts. If all parts
are rebuildable, then you will be refunded the core charge. If parts of the core
are not rebuildable, then those parts will be deducted from the total and you
will receive an adjusted refund.
When you place the engine
in your shopping cart you will see two part numbers, one with an R in front that
represents the engine that you are purchasing and one with a C in front of it
that represents the core charge that you are being billed for until we receive
the rebuildable core (within 60 days).
Condition: New
List Price: $9,500.00
List Price: $9,500.00
P
C Industries Price: $5,500.00
Description:
New 3-53N Industrial Engines Rated 99 BHP @ 2800 RPM.
Engines Have Cast Iron Cylinder Blocks and are an RA Arrangement with Blower on
the Left and Exhaust Manifold on the Right. They Include Limiting Speed
Mechanical Governors, Spring Loaded Injector Control Tubes, N50 Fuel Injectors,
Double Oil Cooler Groups, RH Fuel Pumps, SAE # 3 Flywheel Housings, Dry Type
Center Outlet Exhaust Manifolds, Remote Mounted Oil Filter Adaptors and 18” - 6
Blade Suction Fans. Engines are Dynamometer Tested and Carry a One (1) Year Warranty. Engines
can be Quickly Converted to any RA Application!
3-53 RC Ind. Engine w/o Governor
Condition: New
Condition: New
List
Price: $9,000.00
P C Industry Price: $5,500.00
Description:
New 3-53N RC Industrial Engines With Out Governors, Rack
Assemblies and Links. Engines are Rated 99 BHP @ 2800 RPM. Engines Have Been
Converted to an RC Arrangement with Blower on the Right and Exhaust Manifold on
the Left. They Include Cast Iron Cylinder Blocks, N50 Fuel Injectors, Double
Oil Cooler Groups, RH Fuel Pumps, SAE # 3 Flywheel Housings, Dry Type Center
Condition: Rebuilt List Price: $15,000.00
P C Industries Price: $9,500.00 ($3,500.00 Core Charge included)
Description:
4-53N HeatExchanged Marine Engine, Right
Hand Rotation (viewed from the front) with the Exhaust Manifold and Blower on
the Left (RB Arrangement). Engine is Complete with Spin-on Oil and Fuel
Filters, Spring Loaded Injector Control Tube, Variable Speed Mechanical
Governor, Marine Gear Cooler, Air Silencer, Cast Iron Marine Oil Pan, Water
Cooled Exhaust Manifold, SAE # 4 Flywheel (for Borg-Warner Marine Gear) and
Housing. Engine is Equipped with N45 Fuel Injectors Which Allow it to Produce
112 SHP @ 2500 RPM. The Engine has Been In-Framed Overhauled with New Parts to
Include Blower, Governor, Raw Water Pump, etc. Engine has Been Dynamometer
Tested and Carries a Six (6) Month Warranty.
Condition: Rebuilt
List Price: $13,000.00
List Price: $13,000.00
P C Industries Price: $8,050.00
($2,800.00 Core Charge included)
Description:
4-53NMarine Engine, Right Hand
Rotation (viewed from the front) with the Exhaust Manifold and Blower on the
Right (RD Arrangement). Engine is Setup for Keel Cooling Requiring a Remote
Mounted Day Tank. Engine is Complete with Spin-on Oil and Fuel Filters, Spring
Loaded Injector Control Tube, Variable Speed Mechanical Governor, Marine Gear
Cooler, Cast Iron Marine Oil Pan, New Style Aluminum Rocker Cover, SAE # 3
Flywheel Housing, Flywheel and Water Cooled Exhaust Manifold. Engine is
Equipped with N45 Fuel Injectors Which Allow it to Produce 112 SHP @ 2500 RPM.
The Engine has Been In-Framed Overhauled with New Parts to Include Blower,
Governor, etc. Engine has Been Dynamometer Tested and Carries a Six (6)
Month Warranty.
Condition: Remanufactured
List Price: $17,466.85
List Price: $17,466.85
P C Industries Price: $13,100.00($5,000.00
Core Charge included)
Description:
4-71N Keel Cooled Marine Generator Engine
with Engine Mounted Day Tank, Spring Loaded Injector Control Tubes, Spin-on Oil and Fuel Filters, Air Inlet Housing with Emergency Shutdown, Hydraulic Governor, Water Cooled Exhaust Manifold and SAE # 1 Generator Flywheel and Housing. Engine has Been Remanufactured, Dynamometer Tested and Carries a One (1) Year Parts, Six (6) Month Labor Warranty. Engine is Equipped with N60 Fuel Injectors and is Rated 78 BHP @ 1200 RPM / 117 BHP @ 1800 for Continuous Ratings and/or 140 BHP @ 2100 RPM for an Intermittent Rating.
with Engine Mounted Day Tank, Spring Loaded Injector Control Tubes, Spin-on Oil and Fuel Filters, Air Inlet Housing with Emergency Shutdown, Hydraulic Governor, Water Cooled Exhaust Manifold and SAE # 1 Generator Flywheel and Housing. Engine has Been Remanufactured, Dynamometer Tested and Carries a One (1) Year Parts, Six (6) Month Labor Warranty. Engine is Equipped with N60 Fuel Injectors and is Rated 78 BHP @ 1200 RPM / 117 BHP @ 1800 for Continuous Ratings and/or 140 BHP @ 2100 RPM for an Intermittent Rating.
Condition: Excellent Running Take Out
List Price: $18,775.00
P C Industries Price: $13,350.00 ($6,000.00 Core Charge included)
List Price: $18,775.00
P C Industries Price: $13,350.00 ($6,000.00 Core Charge included)
Description:
4-71T, RCHeat Exchanged Fire Pump Engine
Complete From Front Crankshaft Pulley Through SAE # 1 Flywheel Housing to
Include Spin-on Oil and Fuel Filters, 24VDC 40MT Starter, Farr Air Cleaner
Assembly, Tachometer, Instrument Panel with Ammeter, Oil Pressure and Water
Temperature Gauges. The Engine has 326 Hours Since New and has Been Thoroughly
Inspected on the Upper and Lower Ends with a Remanufactured Blower and Support
Being Installed. Engine has been Dynamometer Tested and Carries a Six
Month Warranty on Parts and Labor. Engine is equipped with M95 Fuel Injectors
and a TH08A64 Turbocharger which Allows it to Develop 260 BHP @ 2300 RPM.
Condition: Rebuilt
List Price: $27,131.22
List Price: $27,131.22
P C Industries Price: $15,250.00
($6,500.00 Core Charge included)
Description:
4-71TIBDDEC III, RD Configuration Industrial Engine Complete From Front Crankshaft Pulley Through SAE # 1 Flywheel to
Include Secondary Spin-on Fuel Filter, Remote Oil Filter Adaptor, Fan Hub,
24VDC 40MT Starter and 26SI 50 Amp alternator. Engine has Been Thoroughly
Inspected on Upper and Lower Ends and In-Frame Overhauled. Engine has Been
Dynamometer Tested and Carries a Six Month Warranty on Parts and labor. Engine is
equipped with a TV6502 Turbocharger and can be Configured to the Following
Horsepower Ratings; 180 BHP @ 2210 RPM, 200 BHP @ 2210 RPM or 225 BHP @ 2210
RPM.
Condition: Remanufactured List Price: $18,000.00
P C Industries Price: $12,500.00
(4,000.00 Core Charge included)
Description:
Remanufactured and
dynamometer tested 6-71N heat exchanged marine engine.
Complete from front crankshaft pulley through SAE # 1 flywheel. Includes
variable speed mechanical governor, air inlet housing with emergency shutdown,
air silencer, spin-on oil filter, secondary fuel filter, water cooled exhaust
manifold, raw water pump and heat exchanger tank with core. Engine is equipped
with N60 mm fuel injectors which allow the engine to develop 210 BHP @ 2100
RPM. Engine carries a one (1) year parts and six (6) month labor warranty.
Condition: Reman
List Price: $27,000.00
List Price: $27,000.00
P C Industries Price: $17,500.00
($5,000.00 Core Charge included)
Description:
8V71N IndustrialEngine Complete with limited
Speed Mechanical Governor, Spring Loaded Injector Control Tubes, SAE # 1 Cast
Iron Flywheel Housing, 16 Plate Oil Cooler Group, Spin-on Oil and Fuel Filters,
Water Cooled Exhaust Manifolds, Air Silencers and Air Inlet Housing with
Emergency Shutdown. Engine has Been Remanufactured, Dynamometer Tested and
Carries a One (1) Year Parts and Six (6) Month Labor Warranty. Engine is
Equipped with N65 Fuel Injectors and is Rated 311 BHP @ 2100 RPM.
Condition: Remanufactured
List Price: $27,500.00
List Price: $27,500.00
P C Industries Price: $17,000.00
($5,500.00 Core Charge included)
Description:
8V71TIndustrial Engine Complete with
Varible Speed Mechanical Governor, Spring Loaded Injector Control Tubes, SAE #
1 Cast Iron Flywheel Housing, 24 Plate Oil Cooler Group, Spin-on Oil and Fuel
Filters and Air Inlet Housing with Emergency Shutdown.Engine has Been
Remanufactured, Dynamometer Tested and Carries a One (1) Year Parts and Six (6)
Month Labor Warranty. Engine is Equipped with N75 Fuel Injectorsand T18A40
Turbocharger and is Rated 350 BHP @ 2100 RPM.
Condition: Remanufactured
List Price: $37,600.00
List Price: $37,600.00
P C Industries Price: $28,250.00
($9,500.00 Core Charge included)
Description:
12V71NKeel Cooled Marine Engine with
Engine Mounted Day Tank, Spring Loaded Injector Control Tubes, Spin-on Oil and
Fuel Filters, Air Inlet Housing with Air Silencers (not in picture), Variable
Speed Mechanical Governor, Oil Cooler Group for Engine and Marine Gear, Water
Cooled Exhaust Manifolds and SAE # 1 Flywheel and Housing. Engine has been
Remanufactured, Dynamometer Tested and Carries a One (1) Year Parts, Six (6)
Month Labor Warranty. Engine is Equipped with N60 Fuel Injectors and is Rated
357 BHP @ 1800 for a Continuous Rating and/or 420 BHP @ 2100 RPM for an
Intermittent Rating.
Condition: Remanufactured
List Price: $46,588.00
List Price: $46,588.00
P C Industries Price: $32,500.00 (9,500.00
Core Charge included)
Description:
Remanufactured and
Dynamometer Tested 16V71N Industrial Engine.
Engine is Complete from Vibration Damper through SAE # 1 Flywheel Housing.
Includes Double Weight Limiting Speed Mechanical Governor, Spring Loaded
Injector Control Tubes, Spin-On Oil and Fuel Filters and SAE # 1 Flywheel
Housing w/Dual Starter Mount. Engine is Equipped with N65 Fuel Injectors
Which Allow it to Develop a Continuous Rating of 478 BHP @ 1800 RPM or an
Intermittent Rating of 564 BHP @ 2100 RPM. Engine Carries a One (1) Year Parts
and Six (6) Month Labor Warranty.
Condition: Remanufactured
List Price: 53,108.03
List Price: 53,108.03
P C Industries Price: 37,000.00
(10,000.00 Core Charge included)
Description:
Remanufactured and
Dynamometer Tested 16V71T Industrial Engine.
Engine is Complete From Front Crankshaft Pulley Through SAE # 1 Flywheel.
Includes Double Weight Limiting Speed Mechanical Governor, Spring Loaded
Injector Control Tubes, Spin-On Oil and Fuel Filters and SAE # 1 Flywheel
Housing w/Dual Starter Mount. Engine is Equipped with T18A40 A/R 1.70
Turbochargers and N70 mm Fuel Injectors Which Allow it to Develop a Continuous
Rating of 613 BHP @ 1800 RPM or an Intermittent Rating of 665 BHP @ 2100 RPM.
Engine Carries a One (1) Year Parts and Six (6) Month Labor Warranty.
Condition: Good Running Take Out P C Industries Price: $10,000.00
Description:
Good Running Take
Out 8V92TA DetroitDiesel Engines Estimated to Have Less Than 750 Hours Since Overhaul.
Engines Include the Following Accessory Groups as Listed Below:
• SAE # 1 Cast Iron Flywheel Housing(starter below mounts)
• Front Trunnion Engine Mount
• Single 32 Plate Oil Cooler Group
• High Capacity Oil Pan
• Front Mounted Turbocharger Group
• Spring Loaded Injector Control Tubes
• Variable Low Speed Limiting Speed (VLSLS) Governor - Allows an Adjustable Idle of 500 to 1800 RPM
• Jacobs Brakes
• Spin-on Secondary Fuel Filter
• Canister Type Oil Filters
• Tachometer Drive Adaptor Mounted on Rear of Blower
Engines Include the Following Accessory Groups as Listed Below:
• SAE # 1 Cast Iron Flywheel Housing(starter below mounts)
• Front Trunnion Engine Mount
• Single 32 Plate Oil Cooler Group
• High Capacity Oil Pan
• Front Mounted Turbocharger Group
• Spring Loaded Injector Control Tubes
• Variable Low Speed Limiting Speed (VLSLS) Governor - Allows an Adjustable Idle of 500 to 1800 RPM
• Jacobs Brakes
• Spin-on Secondary Fuel Filter
• Canister Type Oil Filters
• Tachometer Drive Adaptor Mounted on Rear of Blower
The Pictures Below
Show the Available Options That can be Added to the Engine and the Cost to do
so:
• TuFlo 700 Air Compressor - $ 300.00
• Rockford Fan Hub (Air Actuated Release) - $ 250.00
• 50MT 24VDC Electric Starter - $ 300.00
• Leece-Neville 28VDC Alternator - $ 150.00
• Vickers V20F Hydraulic Pump (13GPM @ 1200 RPM / 19.5 GPM @ 1800 RPM) - $ 200.00
• TuFlo 700 Air Compressor - $ 300.00
• Rockford Fan Hub (Air Actuated Release) - $ 250.00
• 50MT 24VDC Electric Starter - $ 300.00
• Leece-Neville 28VDC Alternator - $ 150.00
• Vickers V20F Hydraulic Pump (13GPM @ 1200 RPM / 19.5 GPM @ 1800 RPM) - $ 200.00
Engines Have Been
Thoroughly Inspected, all Hoses Replaced and Dynamometer
Tested and Carry a 90 Day
Major Failure Parts Warranty. Engines are Equipped with 9A90 Fuel Injectors, TV8117 Turbochargers and will
Develop 445 BHP @ 2100 RPM (Intermittent Rating).
Engines Weigh 2,595 lbs.
Major Failure Parts Warranty. Engines are Equipped with 9A90 Fuel Injectors, TV8117 Turbochargers and will
Develop 445 BHP @ 2100 RPM (Intermittent Rating).
Engines Weigh 2,595 lbs.
Condition:
Running Take Out P C Industries Price: $8,500.00
Description:
Running Take Out 8V92TADetroit DieselEngines Estimated to Have Less Than 1500 Hours Since Overhaul.
Engines Include the Following Accessory Groups as Listed Below:
• SAE # 1 Cast Iron Flywheel Housing (starter below mounts)
• Front Trunnion Engine Mount
• Single 32 Plate Oil Cooler Group
• High Capacity Oil Pan
• Front Mounted Turbocharger Group
• Spring Loaded Injector Control Tubes
• Variable Low Speed Limiting Speed (VLSLS) Governor - Allows an Adjustable Idle of 500 to 1800 RPM
• Jacobs Brakes
• Spin-on Secondary Fuel Filter
• Canister Type Oil Filters
• Tachometer Drive Adaptor Mounted on Rear of Blower
Engines Include the Following Accessory Groups as Listed Below:
• SAE # 1 Cast Iron Flywheel Housing (starter below mounts)
• Front Trunnion Engine Mount
• Single 32 Plate Oil Cooler Group
• High Capacity Oil Pan
• Front Mounted Turbocharger Group
• Spring Loaded Injector Control Tubes
• Variable Low Speed Limiting Speed (VLSLS) Governor - Allows an Adjustable Idle of 500 to 1800 RPM
• Jacobs Brakes
• Spin-on Secondary Fuel Filter
• Canister Type Oil Filters
• Tachometer Drive Adaptor Mounted on Rear of Blower
The Pictures Below Show the Available Options
That can be Added to the Engine and the Cost to do so:
• TuFlo 700 Air Compressor - $ 300.00
• Rockford Fan Hub (Air Actuated Release) - $ 250.00
• 50MT 24VDC Electric Starter - $ 300.00
• Leece-Neville 28VDC Alternator - $ 150.00
• Vickers V20F Hydraulic Pump (13GPM @ 1200 RPM / 19.5 GPM @ 1800 RPM) - $ 200.00
• TuFlo 700 Air Compressor - $ 300.00
• Rockford Fan Hub (Air Actuated Release) - $ 250.00
• 50MT 24VDC Electric Starter - $ 300.00
• Leece-Neville 28VDC Alternator - $ 150.00
• Vickers V20F Hydraulic Pump (13GPM @ 1200 RPM / 19.5 GPM @ 1800 RPM) - $ 200.00
Engines Have Been Thoroughly Inspected, all
Hoses Replaced and Dynamometer Tested and Carry a 90 Day
Major Failure Parts Warranty. Engines are Equipped with 9A90 Fuel Injectors, TV8117 Turbochargers and will
Develop 445 BHP @ 2100 RPM (Intermittent Rating).
Engines Weigh 2,595 lbs.
Major Failure Parts Warranty. Engines are Equipped with 9A90 Fuel Injectors, TV8117 Turbochargers and will
Develop 445 BHP @ 2100 RPM (Intermittent Rating).
Engines Weigh 2,595 lbs.
Condition: Remanufactured
List Price: $42,714.29
List Price: $42,714.29
P C Industries Price: $31,500.00
(12,000.00 Core Charge included)
Description:
8V92TABIndustrial Engine Complete From
Crankshaft Pulley Through SAE #1 Industrial Flywheel Housing to Include Water
Cooled Exhaust Manifolds, Rear Mounted Water Cooled Turbocharger, Spring Loaded
Injector Control Tubes, Air Inlet Housing with Emergency Shutdown, Variable
Speed Mechanical Governor, Single 32 Plate Oil Cooler Group, Cast Iron Oil Pan
and Ready for Zone 2 Oil and Gas Applications. Engine has Been Completely
Remanufactured, Dynamometer Tested and Carries a Warranty of One (1) Year on
Parts and Six (6) Months on Labor. Engine is Equipped with M15 Fuel Injectors,
TW8403 Turbocharger and is Rated 550 BHP @ 2100 RPM.
Condition: Rebuilt
List Price: $28,838.00
List Price: $28,838.00
P C Industries Price: $16,500.00
($6,000.00 Core Charge included)
Description:
8V92TASilver Industrial Engine
Complete with Limiting Speed Mechanical Governor, Spring Loaded Injector
Control Tubes, SAE # 1 Cast Iron Flywheel Housing (starter above mounts),
Single 32 Plate Oil Cooler Group and Spin-on Oil and Fuel Filters. Engine
has been Rebuilt, Dynamometer Tested and Carries a Six (6) Month Parts and
Labor Warranty. Engine is Equipped with 9A90 Fuel Injectors, TV8117
Turbocharger and is Rated 445 BHP @ 2100 RPM.
Condition: Remanufactured List Price: $29,000.00
P C Industries Price: $20,048.00
($6,500.00 Core Charge included)
Description:
8V92TA Silver Industrial Engine Complete with Variable Speed Mechanical Governor, Spring Loaded Injector
Control Tubes, SAE # 1 Cast Iron Flywheel Housing (starter below mounts),
Single 32 Plate Oil Cooler Group, Spin-on Oil and Fuel Filters, and a Tu-Flo
700 Air Compressor. Engine has Been Remanufactured, Dynamometer Tested and
Carries a One (1) Year Parts and Six (6) Month Labor Warranty. Engine is
Equipped with 9A90 Fuel Injectors, TV8117 Turbocharger and is Rated 445 BHP @
2100 RPM.
Condition: Remanufactured
List Price; $76,500.00
List Price; $76,500.00
P C Industries Price: $51,000.00
(15,000.00 Core Charge included)
Description:
16V92TA Industrial Engine Complete with
SAE # 1 Flywheel Housing, Double Weight Limiting Speed Governor, Spin-on Oil
and Fuel Filters, Spring Loaded Injector Control Tubes and Air Inlet Housings
with Emergency Shutdowns. Engine is Equipped with 9290 Injectors, T18A90
Turbochargers and is Rated 875 BHP @ 2100 RPM. It has been Completely
Remanufactured, Dynamometer Tested and Carries a One (1) Year Warranty.
Condition: Remanufactured
List Price: $72,000.00
List Price: $72,000.00
P C Industries Price: $49,000.00
(15,000.00 Core Charge included)
Description:
16V92T Industrial Engine Complete with
SAE # 0 Flywheel and Housing, Woodward SGXA Hydraulic Governor, Spin-on Oil and
Fuel Filters, Spring Loaded Injector Control Tubes and Air Inlet Housings with
Emergency Shutdowns. Engine is Equipped with 9215 Injectors, TV8101
Turbochargers and is Rated 830 BHP @ 1800 RPM. It has Been Completely
Remanufactured, Dynamometer Tested and Carries a One (1) Year Warranty.
Condition:
Remanufactured
List Price: $93,750.00
List Price: $93,750.00
P C Industries Price: $65,000.00
($14,000.00 Core Charge included)
Description:
12V149N(Naturally Aspirated) Keel Cooled Marine Engine Complete from Crankshaft Pulley Through SAE # 0 Flywheel to include
Single Weight Variable Speed Mechanical Governor, Spring Loaded Injector
Control Tubes, Air Inlet Housings, Water Cooled Exhaust Manifolds, Engine and
Marine Gear Oil Cooler Group and Spin-on Oil Filters. Engine is Setup for Use
With Remote Mounted Day Tank. Engine has Been Remanufactured, Dynamometer
Tested and Carries a One (1) Year Parts and Six (6) Month Labor Warranty.
Engine is Equipped with 130mm Fuel Injectors and is Rated 770 SHP @ 1900 RPM,
Which is an Intermittent Rating.
Condition: Remanufactured
List Price: $215,000.00
List Price: $215,000.00
P C Industries Price: $173,500.00
(45,000.00 Core Charge included)
Description:
16V149TIB DDECIII Heat
Exchanged Cooled Marine/Industrial Engine Complete with Spin-on Oil, Fuel and
Water Filters, SAE # 0 Flywheel and Housing, Water Cooled Exhaust Manifolds,
Air Inlet Housings with Emergency Shutdowns, Heavy Duty Tube and Shell Oil
Cooler Group, 24V DC 50MT Electric Starters, Dual Engine Block Heaters, Heavy
Duty Heat Exchanger Group to Include Dual High Flo Jabsco Raw Water Pumps, Anti
Vibration Mounts, Crankcase Pressure Monitor (DDEC) and Master and Receiver
ECM’s Complete with all Harnesses to the Marine Interface Module
(MIM). Engine is Equipped with TV8405 Turbochargers and is Rated 1800 BHP
@ 1900 RPM. Engine has been Completely Remanufactured, Dynamometer Tested and
Carries a One (1) Year Warranty.
Condition: Remanufactured
List Price: $160,000.00
List Price: $160,000.00
P C Industries Price: 109,000.00
($15,000 Core Charge Included)
Description:
16V149TIB Industrial Engine
Complete with Hydraulic Governor, SAE # 0 Flywheel Housing, Dry Type Exhaust
Manifolds, Spring Loaded Injector Control Tubes, Air Inlet Housings with
Emergency Shutdowns, Spin-on Oil Filters and Plate Type Oil Cooler Group.
Engine is Equipped with 190mm Fuel Injectors, TV8403 Turbochargers and is Rated
1800 BHP @ 1900 RPM. Engine has Been Completely Remanufactured, Dynamometer
Tested and Carries a One (1) Year Warranty.
Condition: Remanufactured List Price: 38,000.00
P C Industries Price: 18,500.00
Description:
6-71NAKeel Cooled 75kW, 1200 RPM Generator Set Includes 24VDC Electric Starter, Spin-on Oil and Fuel Filters,
Engine Mounted Keel Cooled Tank, Water Cooled Exhaust Manifold, Woodward
Hydraulic Governor w/110V Servo Motor, Dry Type Donaldson Air Cleaners, Gauge
Panel to Include Starter Button, Toggle Switch for RPM Adjustment, Water
Temperature and Oil Pressure Murphy Switch Gauges, High Water Temperature, Low
Oil Pressure and Overspeed Emergency Shutdown and 75kW @ 1200RPM, 3 Phase, 60
Hertz, 208V, 261 Amp Marathon Generator End. Engine has been Completely
Remanufactured and Dynamometer Tested. Generator has Been Certified and Load
Bank Tested. Engine Carries a One (1) Year Warranty on Parts and Six (6) Months
on Labor. Generator End Carries 90 Day Part and Labor Warranty.
Condition: Excellent Running Take Out
List Price: $15,500.00
List Price: $15,500.00
P
C Industries Price: $7,500.00
Description:
Condition: Excellent Running
Takeout List Price: $76,000.00
P C Industries Price: $44,500.00
Description:
16V92TIndustrial or Generator Engine
Complete with SAE # 0 Flywheel and Housing, Woodward SGXA Hydraulic Governor,
Spin-on Oil and Fuel Filters, Spring Loaded Injector Control Tubes, 24VDC
Electric Starters, Air Inlet Housings with Emergency Shutdowns, Rear Mounted
Dry Vortox Type Air Cleaners, 8 Blade 48” Pusher Fan with Heavy Duty Radiator
and Skid. Engine is Equipped with 9215 Injectors, TV8101 Turbochargers and
is an ETRO with only 618 Hours Since New. It has Been Thoroughly Inspected,
Repaired as Needed and is Rated 830 BHP @ 1800 RPM. This Engine Carries a Six
(6) Month Parts and Labor Warranty.
Condition: New
List Price: $16,866.39
List Price: $16,866.39
P C Industries Price: $10,950.00
Discription:
New Detroit Diesel 3-53N 4VMechanical Power Units to include the Following New Items:
• Detroit
Diesel 3-53N 4 Valve Engine w/SAE # 3 Flywheel and Housing
• Heavy Duty Solder Coated Radiator and Guard
• Heavy Duty Custom 4" Channel Skid
• Single Plate 10" Rockford PTO Assembly
• 22" 12 Blade Heavy Duty Poly Suction Fan
• Fan Shroud
• Finger Guard
• Double 8 Plate Oil Cooler Group Allows
External Cooling for Additional Accessories
• Spring Loaded Injector Control Tube
• Spin-on Oil and Fuel Filters
• Center Outlet Dry Type Exhaust Manifold
• Donaldson Spark Arresting Mufflers with Rain
Cap
• New 12VDC, 12SI, 105 Amp Alternator
• New 12VDC, 37MT Starter
• Heavy Duty Donaldson Air Cleaner with Rain
Cap
• Instrument Panels to Include Murphy Switch
Gauges, (Ammeter, Oil Pressure and Water Temperature),
Isspro
Electric Tachometer w/Hour Meter, Key Switch, Throttle and Shutdown Cables.
Engines are Equipped with N50 Fuel Injectors Which Allow
Them to Develop:
• 98 BHP @ 2800 RPM
• 91 BHP @ 2500 RPM (Factory Setting)
• 84 BHP @ 2200 RPM
• 78 BHP @ 2000 RPM
• 70 BHP @ 1800 RPM
All Units are Completely Assembled and Dynamometer Tested.
Units Can be Shipped with Muffler Loose if Required.
Complete Unit Weighs 1,530 lbs.
Dimensions with Mounted Muffler - 60" X 31" X
73"
Dimensions w/o Mounted Muffler - 60" X 31" X
53".
